Mashiinnada Hawk Multi Rip saw
| Awoodda matoorka ugu muhiimsan: | 18.5KW |
| Matoorka Quudinta: | 1.5KW |
| Xawaaraha ugu badan: | 3200 (r/min) |
| Tilmaamaha daabka miinshaar: | 300mmX3.2mmX2.2mmX(80-100)mm |
| Xawaaraha la arkay: | La hagaajin karo 15 ~ 35 (m/min) |
| Toosannimada xaashida: | <0.2mm/m |
| Dhexroor daab arka: | 80 ~ 100mm |
| Dhumucda wax lagu jeexo: | 3-25mm |
| Cabirka: | Dhererka 2.2X Balladhka 1.9X Dhererka 1.2 (m) |
| Miisaanka: | 2.6 (T) |
Mashiinku waxa uu ka kooban yahay jidh si buuxda u xidhan iyo goob quudinta iyo soo daynta.Mashiinka miinshaarku wuxuu si toos ah ugu dhejiyaa usha ugu weyn ee matoorka, habka quudinta waxaa kaxeeya matoorka xawaaraha isbeddelka ah ee la hagaajin karo, iyo rullaluistemadka wadista quudinta ayaa la isku hagaajin karaa, mashiinka oo dhan wuxuu leeyahay qaab dhismeed iyo naqshad horumarsan.
Tilmaamaha ugu muhiimsan:
1, tignoolajiyada horumarsan, adeegsiga naqshadaynta software saddex-cabbir ah, xarun weyn oo farsamaynta gantry, heerka hogaaminta gudaha;
2, saxda ah ee saxda ah, dhumucdiisuna way wanaagsan tahay, waxay buuxin kartaa shuruudaha sagxadda alwaaxda ku dayashada, sagxadaha guud ee laminate iyo sagxadda sagxadda SPC waxay gaari kartaa toosnaan wanaagsan, saameyn badbaadinta alaabta;
3, ilaalinta deegaanka, mashiinka oo dhan si buuxda ayaa loo xiray, boodhka la soo saaray si toos ah ayaa loo sii daayaa iyada oo loo marayo nidaamka dheecaanka boodhka, deegaanka shaqadu waa nadiif.
Qiyaasaha farsamada:
1. Cabbirka sagxada:
- ballaca ugu badan: 1300 mm.
- dhumucdiisuna: 6-20 mm.
2. Sharaxaada qalabka aasaasiga ah:
- Saxan saxan sare leh oo dahaaran oo leh dhexroor dunnidu tahay 80 mm iyo dammaanad labajibbaaran; Dhexroorka dunta dunta waa 100 mm marka la isticmaalo shaft shaft hydraulic.
- mishiinka dunta 18.5 kw.
Rullalulatuska jaraa'id ee sare waa rullaluistemadka caagga ah, rullalulatada hoosena waa rullaluistemadka birta chromium adag.
- Qalabka ka saarista siigada dusha sare ee gudaha.
- goynta daabka miinshaar, ka hortagga garaacista iyo adkaynta qalabka.
- aaladda faakuumaynta dhexe.
3. Xawaaraha khadka wax soo saarka:
-25 -35 m/daqiiqo
Khadka Goynta Gawaarida ee Waxqabadka Sare ee Hawk waxaa lagu daray HKJ900 Multi Rip Saw, Mashiinka Isteerinka Vacuum iyo HKC6 Cross Cut miinshaar.Khadka Goynta Gawaarida ee Hawk High Performance Auto wuxuu ku habboon yahay xawaaraha sare, goynta saxda ah iyo isku toosinta taarikada waaweyn, wuxuuna aad ugu habboon yahay walxaha dhumucdiisu yar tahay sida dabaqa SPC ee qallalan iyo sagxada LVT beddelka mashiinka feerka.Daab miinshaar hal-abuur leh oo HKJ900 ah oo guuraya iyo qalabka hagaajinta ee madaxbannaan ayaa garwaaqsanaya beddelka degdegga ah ee daab miinshaar iyo beddelka degdegga ah ee qeexitaanka sagxadda.Habka isku xirka wax soo saarka tooska ah wuxuu ogaan karaa xawaaraha goynta ee mitirka 40 daqiiqadii wuxuuna si weyn u yareynayaa qiimaha wax soo saarka
Khadka Goynta Waxqabadka Sare ee Hawk:
1. Waxtarka sare, xawaaruhu waa 15-18 pcs / min.
2.Saaxsanaanta sare, toosnaanta guddiga lagu xakameynayo gudaha 0.05-0.10mm / m.
Qaab dhismeedka 3.Separate ee daab miinshaar iyo matoorka, si ay si dhakhso ah oo fudud u bedeli kartaa sifooyinka alaabta kala duwan.
Xirmooyinka shaashadda 4.Touch, mashiinka servo wuxuu xakameynayaa dhaqdhaqaaqa muraayadda, hawlgal sahlan, saxsanaan sare.
5.Cutting caaryada uma baahna, waxay badbaadin kartaa kharashka iyo waqtiga dejinta.
6.Cut alaabta taas oo saxafiyiinta feerka ma farsamayn karaan
7. Habka Dufcaddii, ka-shaqaynta aagga yar.
8.Realize automation ee alaabta joogtada ah, la yareeyo tirada shaqada.
| HKJ900 | HKC6 | |
| Spindle power motor | 5.5kw | 4.0kw |
| Matoorka daabka arka | 8*5.0kw | 3*5.0kw |
| Xawaraha matoorka daabku | 2500 - 5200rpm (beddelka soo noqnoqda) | 2500 - 5200rpm (beddelka soo noqnoqda) |
| Qaabka kala fogeynta daabka arka | Isku-habaynta dhijitaalka ah ee shaashadda taabashada | Isku-habaynta dhijitaalka ah ee shaashadda taabashada |
| Saxnaanta hagaajinta kala dheereynta daabka | ± 0.015mm | ± 0.015mm |
| Dhexroor daab arka | 300 - 320mm | 300 - 320mm |
| Dhexroorka daloolka gudaha daab miinshaar | 140mm | 140mm |
| Dhumucda daabka arka | 1.8-3mm | 1.8-3mm |
| Hagaajinta kala duwan ee qaadista daabka miinshaarka | -10 - 70mm (U qaado diyaaradda shaqaynaysa tixraac ahaan) | -- |
| Qaabka hagaajinta daab qaadista | Isku-habaynta dhijitaalka ah ee shaashadda taabashada | -- |
| Xawaaraha saxanka wax lagu gooyo | 5 - 40m/daqiiqo (beddelka soo noqnoqda) | 5 - 40m/daqiiqo (beddelka soo noqnoqda) |
| Dhumucda saxanka wax lagu jeexo | 2-20mm | 2-20mm |
| Ballaca ugu badan ee saxan miinshaar | 1350mm | 600mm |
| Kala duwanaanshaha dhererka saxanka arka | 500 - 2400mm | 2400mm |
| Miisaanka guud ee qalabka | ≈5.5T | ≈3.5T |
Alaabooyinka la xidhiidha
-
Mashiinnada Hawk Saddex Rip saw
Qiyaasaha farsamada Awoodda mootada: 3* 4KW Matoorka Quudinta: 1.5KW Xawaaraha ugu sarreeya: 2980 (r/min) Qeexitaanka daabka: 300mmX3.2mmX2.2mmX40mm Xawaaraha arka: La hagaajin karo 15 ~ 35 (m/min) Dhumucdiisuna waxay tahay: 3-25mm : 1160mm*2960mm*1140mm Miisaanka: 2.1(T) Mashiinada Hawk ee Saddexda Rip Saw waxa ay ka kooban tahay jidh si buuxda u xidhan iyo goob quudin iyo wax ku shubasho ah....
