• page_head_bg

Mashiinnada Hawk Saddex Rip saw

Sharaxaad Gaaban:

Mashiinnada Hawk Three Rip Saw waxaa inta badan loo isticmaalaa in lagu gooyo looxa oo dhan laba ama saddex qaybood oo substrate ah, sida sagxadda laminateerka, sagxadda alwaax adag, sagxadda bakelite, looxa balaastikada ah iyo looxyada kale, waa mashiin muhiim u ah wax soo saarka sagxadaha.


Faahfaahinta Alaabta

Tags Product

Xuduudaha farsamada

Awoodda matoorka: 3* 4KW
Matoorka Quudinta: 1.5KW
Xawaaraha ugu badan: 2980 (r/min)
Tilmaamaha daabka miinshaar: 300mmX3.2mmX2.2mmX40mm
Xawaaraha la arkay: La hagaajin karo 15 ~ 35 (m/min)
Dhumucda wax lagu jeexo: 3-25mm
Cabirka: 1160mm*2960mm*1140mm
Miisaanka: 2.1 (T)

Mashiinnada Hawk Three Rip Saw waxa ay ka kooban yihiin jidh si buuxda u xidhan iyo goob quudin iyo wax ku shubid ah.Mashiinka miinshaarku wuxuu si toos ah ugu dhejiyaa usha ugu weyn ee matoorka, habka quudinta waxaa kaxeeya matoorka xawaaraha isbeddelka ah ee la hagaajin karo, iyo rullaluistemadka wadista quudinta ayaa la isku hagaajin karaa, mashiinka oo dhan wuxuu leeyahay qaab dhismeed iyo naqshad horumarsan.

Mashiinnada Hawk Saddexda Rip waxay arkeen astaamo horumarsan:

1, tignoolajiyada horumarsan, isticmaalka naqshadaynta software 3D, farsamaynta xarunta farsamaynta, heerka hogaaminta gudaha;

2, saxda ah ee saxda ah, fiirsashada toosan ee tolnimada waa mid wanaagsan, waxay buuxin kartaa shuruudaha dabaqa alwaaxda ku dayashada, muraayadda guud ee laminate waxay gaari kartaa saameynta tolida toosan, alaabta badbaadinta;

3, hawlgalka fudud, sida waafaqsan dhumucda dhulka si loo hagaajiyo booska u dhexeeya duudduuban cadaadiska sare iyo hoose, kaliya rux gacanta si aad u dhamaystirto hagaajinta ee duudduuban cadaadiska;

4, afar miinshaar matoorka daab kala dheeraynta by hagaajinta fur, ku haboon oo degdeg ah, booska saxda ah;

5, ilaalinta deegaanka, mashiinka oo dhan waa la xiray, boodhka la soo saaray si toos ah ayaa loo sii daayaa iyada oo loo marayo nidaamka dheecaanka boodhka, deegaanka shaqadu waa nadiif.

Afar, tilmaamayaasha farsamada ugu waaweyn:

Awoodda matoorka ugu weyn: 4×3Kw

Xawaaraha matoorka ugu weyn: 2980 RPM

Dhexroor daab: 300mm

Xawaaraha quudinta: la hagaajin karo 25 ~ 40m/min

Cabirka mashiinka: 3.3m×2m×1.1m

Miisaanka mashiinka: 1.9T

Awoodda mootada: 3 * 4KW Matoorka Quudinta: 1.5KW Xawaaraha ugu sarreeya: 2980 (r / min) Qeexitaanka daabka: 300mmX3.2mmX2.2mmX40mm Xawaaraha arkay: La hagaajin karo 15 ~ 35 (m / min) Dhumucdiisuna waxay: 3-25mm cabbirka: 1160mm *2960mm*1140mm Miisaanka: 2.1(T)

High Performance Automatic Cutting line

Hordhac Kooban

Khadka Goynta Gawaarida ee Waxqabadka Sare ee Hawk waxaa lagu daray HKJ900 Multi Rip Saw, Mashiinka Isteerinka Vacuum iyo HKC6 Cross Cut miinshaar.Khadka Goynta Gawaarida ee Hawk High Performance Auto wuxuu ku habboon yahay xawaaraha sare, goynta saxda ah iyo isku toosinta taarikada waaweyn, wuxuuna aad ugu habboon yahay walxaha dhumucdiisu yar tahay sida dabaqa SPC ee qallalan iyo sagxada LVT beddelka mashiinka feerka.Daab miinshaar hal-abuur leh oo HKJ900 ah oo guuraya iyo qalabka hagaajinta ee madaxbannaan ayaa garwaaqsanaya beddelka degdegga ah ee daab miinshaar iyo beddelka degdegga ah ee qeexitaanka sagxadda.Habka isku xirka wax soo saarka tooska ah wuxuu ogaan karaa xawaaraha goynta ee mitirka 40 daqiiqadii wuxuuna si weyn u yareynayaa qiimaha wax soo saarka
Khadka Goynta Waxqabadka Sare ee Hawk:
1. Waxtarka sare, xawaaruhu waa 15-18 pcs / min.
2.Saaxsanaanta sare, toosnaanta guddiga lagu xakameynayo gudaha 0.05-0.10mm / m.
Qaab dhismeedka 3.Separate ee daab miinshaar iyo matoorka, si ay si dhakhso ah oo fudud u bedeli kartaa sifooyinka alaabta kala duwan.
Xirmooyinka shaashadda 4.Touch, mashiinka servo wuxuu xakameynayaa dhaqdhaqaaqa muraayadda, hawlgal sahlan, saxsanaan sare.
5.Cutting caaryada uma baahna, waxay badbaadin kartaa kharashka iyo waqtiga dejinta.
6.Cut alaabta taas oo saxafiyiinta feerka ma farsamayn karaan
7. Habka Dufcaddii, ka-shaqaynta aagga yar.
8.Realize automation ee alaabta joogtada ah, la yareeyo tirada shaqada.

Qiyaasta Farsamada

  HKJ900 HKC6
Spindle power motor 5.5kw 4.0kw
Matoorka daabka arka 8*5.0kw 3*5.0kw
Xawaraha matoorka daabku 2500 - 5200rpm (beddelka soo noqnoqda) 2500 - 5200rpm (beddelka soo noqnoqda)
Qaabka kala fogeynta daabka arka Isku-habaynta dhijitaalka ah ee shaashadda taabashada Isku-habaynta dhijitaalka ah ee shaashadda taabashada
Saxnaanta hagaajinta kala dheereynta daabka ± 0.015mm ± 0.015mm
Dhexroor daab arka 300 - 320mm 300 - 320mm
Dhexroorka daloolka gudaha daab miinshaar 140mm 140mm
Dhumucda daabka arka 1.8-3mm 1.8-3mm
Hagaajinta kala duwan ee qaadista daabka miinshaarka -10 - 70mm (U qaado diyaaradda shaqaynaysa tixraac ahaan) --
Qaabka hagaajinta daab qaadista Isku-habaynta dhijitaalka ah ee shaashadda taabashada --
Xawaaraha saxanka wax lagu gooyo 5 - 40m/daqiiqo (beddelka soo noqnoqda) 5 - 40m/daqiiqo (beddelka soo noqnoqda)
Dhumucda saxanka wax lagu jeexo 2-20mm 2-20mm
Ballaca ugu badan ee saxan miinshaar 1350mm 600mm
Kala duwanaanshaha dhererka saxanka arka 500 - 2400mm 2400mm
Miisaanka guud ee qalabka ≈5.5T ≈3.5T

  • Hore:
  • Xiga:

  • Halkan ku qor fariintaada oo noo soo dir

    Alaabooyinka la xidhiidha

    • Hawk Machinery Multi Rip Saw

      Mashiinnada Hawk Multi Rip saw

      Qiyaasaha farsamada Awoodda ugu weyn ee matoorka: 18.5KW Matoorka quudinta: 1.5KW Xawaaraha ugu sarreeya: 3200 (r/min) Qeexitaanka daabka: 300mmX3.2mmX2.2mmX(80-100)mm Xawaaraha la arkay: 15 ~ 35 (m/min) la hagaajin karo toosan: <0.2mm/m Dhexroorka daabka la arkay: Ф80~Ф100mm Dhumucdiisuna tahay wax-saarka: 3-25mm Cabirka: Dhererka 2.2X Balladhka 1.9X Dhererka 1.2 (m) Miisaanka: 2.6(T) Maanka...